Nowadays, many machining workshops in hardware workshops do not solve the environmental pollution caused by oil mist by expelling it from the outside. They only transfer the indoor pollution source to the atmosphere outside, which is not allowed by law. Nowadays, people's awareness of environmental protection is becoming stronger and stronger. In the long run, it will inevitably be subject to complaints from people and investigation by environmental protection departments, so this behavior is very dangerous.

In addition, insufficient ventilation may also lead to an increase in indoor oil mist concentration, which not only affects the working environment of workers, but also poses a major threat to employee safety. When some oil mist comes into contact with an open flame, such as a flame during processing, it is very easy to ignite and cause a fire alarm. In addition, dealing with the discharge of oil mist in this way for a long time can result in the accumulation of oil mist and contamination of electrical equipment such as workshop floors, walls, machinery and lighting equipment, air conditioning equipment, and other equipment. The prolonged exposure of the workshop to a dirty and disorderly environment, coupled with an increase in temperature during job processing, creates a vicious cycle of air pollution in the workshop.

On the other hand, metalworking fluids are prone to volatilization, and the emissions of these oil mist are directly consumed without being utilized, resulting in waste and increasing the cost of machine production and production. In addition, the electricity required for exhaust is also very high, which does not reduce the power consumption of oil mist purification. If there is a requirement for the temperature of the workshop, the resulting cooling air consumption and air conditioning power consumption will be greater, and these costs may actually exceed the investment cost of the oil mist collector for a long time.

Based on the above aspects, the workshop machine oil mist purifier has many benefits for machine tool processing and production. It is not suitable for factories to not calculate the long-term production and manufacturing costs for immediate investment costs. Therefore, it is recommended that hardware factories and machining workshops install industrial oil mist purifiers as soon as possible.